VIBRA Trainer Elite /
VIBRA Trainer Elite Pro
Model: SE212 / SE233
USER MANUAL
TABLE OF CONTENTS
Introduction ............................................................................ 3
Key Features........................................................................... 4
Watch................................................................................... 4
LCD Display ......................................................................... 5
Getting Started ....................................................................... 8
Unpacking the Watch .......................................................... 8
Turning On the Watch (First-Time Use Only) ...................... 8
Batteries............................................................................... 8
Wearing the Chest Belt and Watch .................................... 11
Transmission Signal .......................................................... 12
Signal Search .................................................................... 14
Setting the Keypad Tone / Light Mode ............................... 14
Activating the Backlight...................................................... 15
Activating the Keypad Lock ............................................... 15
Switching Between Operation Modes ................................ 15
Using the Clock .................................................................... 16
Using the Alarm(s)................................................................ 17
Setting the Alarm(s) ........................................................... 17
Turning the Alarm Sound Off ............................................. 17
Activating / Deactivating the Alarm .................................... 18
Exercise Profile .................................................................... 18
Target Activity .................................................................... 20
Maximum / Lower / Upper Heart Rate Limit....................... 20
Heart Rate Alert ................................................................. 21
User Profile ........................................................................... 21
Activity Level ...................................................................... 23
About the Fitness / Body Mass Index ................................ 23
Fitness Index ..................................................................... 23
Body Mass Index (VIBRA Trainer Elite Pro Only).............. 24
1
SE212 English R7 OP_OK.p65
1
2006.1.6, 1:53 AM
INTRODUCTION
Thank you for selecting the Oregon ScientificTM VIBRA Trainer
Elite (SE212) / VIBRA Trainer Elite Pro (SE233) watch as your
sports fitness product of choice. This precision device includes
the following features:
•
Heart rate monitor with cordless transmission between watch
and chest belt.
•
•
Digital coding system to reduce environmental interference.
Heart rate monitoring system when you go above or below
your upper and lower heart rate limit.
•
Vibration, visual or sound alert for heart rate thresholds during
training.
•
•
Memory stores heart rate figures during exercise.
SMART TRAINING PROGRAM enables you to complete
exercise cycles effectively.
•
•
•
Calorie consumption and percent fat burn display during and
after exercise.
Exercise profile - to calculate your personal heart rate limit for
training.
User profile - to calculate your fitness index and body mass
index (BMI - VIBRA Trainer Elite Pro only).
•
•
Stopwatch.
99 lap memory storage showing average heart rate and
maximum heart rate. (VIBRA Trainer Elite Pro only.)
•
Dual alarms with a choice of daily, weekday or weekend
settings.
•
•
•
Mounting bracket, chest belt and carrying case included.
Watch - up to 50 metres water resistant.
Chest belt - splash proof.
The use of the SE212 or SE233 watch is for sport
IMPORTANT
purposes only and it is not meant to replace any medical advice.
This manual contains important safety and care information, and
provides step-by-step instructions for using this product. Read
the manual thoroughly, and keep it in a safe place in case you
need to later refer to it.
3
SE212 English R7 OP_OK.p65
3
2006.1.6, 1:53 AM
KEY FEATURES
WATCH
SE212 - VIBRA Trainer Elite
SE233-VIBRATrainerElitePro
1
2
3
4
5
6
1
1. - VIBRA Trainer Elite only - MEM / -: Display training records;
decrease setting value.
- VIBRA Trainer Elite Pro only - L / MEM / -: Display training
records; decrease setting value; mark a lap.
2. LCD display.
3. MODE: Switch to another display.
4. ST / SP / +: Start / stop timer; increase setting value.
5.
/ : Turn on backlight for 3 seconds; lock / unlock the
keypad.
6. SET: Enter Setting Mode; select another setting option; display
different information during training; reset timer / stopwatch.
4
SE212 English R7 OP_OK.p65
4
2006.1.6, 1:53 AM
LCD DISPLAY
1
2
3
1. Area 1
2. Area 2
3. Area 3
Area 1
1
2
5
6
7
3
4
1. TTL: Total exercise time is displayed.
2. WARM: Warm-up timer is shown or running.
3. RESET: Recovery timer is shown or running.
4. TIMER: SMART TRAINING PROGRAM is shown or running.
5. SPLIT: Shows and calculates split time (VIBRA Trainer Elite
Pro only).
6. : Stopwatch is shown or running.
7. LAP: Shows current lap time or memory lap time (VIBRA
Trainer Elite Pro only).
5
SE212 English R7 OP_OK.p65
5
2006.1.6, 1:53 AM
Area 2
1
4
5
2
3
6
7
1. Date: MM:DD or DD:MM and day of the week; stopwatch time.
2.
/ : Alarm 1 and 2 time; waves show when alarm
is activated.
3.
: Cursor highlights the selected alarm in Alarm Mode.
4. kcal: Calorie unit.
5.
6.
7.
: Keypad tone is disabled.
: Light Mode is enabled.
: Keypad lock is enabled.
Area 3
1
2
3
9
10
11
12
13
14
15
4
5
6
7
8
16
1. Time: HH:MM.
2. AVG: Average heart rate is displayed.
3. MAX: Maximum heart rate is displayed (VIBRA Trainer Elite
Pro only).
4. AM / PM: Appears when the 12-hour clock / alarm is being used.
5.
/ : Flash in Timer / Stopwatch Mode when the heart rate
is above or below the upper and lower zone.
6.
7.
: Heart rate alert is set to vibrate.
: Heart rate is above or below limit; sound alert is
activated.
8.
: Flashes when receiving heart rate signal.
9. kg / lb: Body weight unit.
6
SE212 English R7 OP_OK.p65
6
2006.1.6, 1:53 AM
10. % FAT: Percentage of fat burn.
11. cm: Height unit.
12. Yr: Year of user's birth.
13. LAP: Take lap; lap number (VIBRA Trainer Elite Pro only).
14. MEM: Stopwatch or timer memory is shown.
15. VIBRO: Battery is too low for vibrate function.
16.
: Battery status.
7
SE212 English R7 OP_OK.p65
7
2006.1.6, 1:53 AM
GETTING STARTED
UNPACKING THE WATCH
When you unpack your VIBRA Trainer Elite / VIBRA Trainer Elite
Pro watch, make sure to keep all the packing materials in a safe
place, in case you need to later transport or return the product for
servicing.
In this box, you will find:
•
•
•
•
•
Watch
Heart rate chest belt
Mounting bracket
Carry case
2 x CR2032 lithium batteries - already installed
TURNING ON THE WATCH (FIRST-TIME USE ONLY)
Press any key for 2 seconds to activate the LCD display.
BATTERIES
The VIBRATrainer Elite / VIBRATrainer Elite Pro uses two CR2032
lithium batteries, one for the watch and another for the heart rate
chest belt. Both are already installed. See the table below for
battery warnings.
LOW BATTERY ICON
DESCRIPTION
The battery is too low to run the
backlight
The battery is too low to run the
vibration alert
The watch battery is low; the
vibration alert and backlight cannot
be used
The chest belt battery is nearly too
low to send a signal to the watch
The batteries typically last one year. We highly recommend that
you contact the retailer or our customer service department if you
need to replace them.
8
SE212 English R7 OP_OK.p65
8
2006.1.6, 1:53 AM
To replace the watch battery:
1. Turn the watch over so that you are looking at the back plate.
2. Disconnect the watchstrap as shown above.
3. Using a small screwdriver, remove the four screws that hold
the back plate into position.
4. Remove the back plate and set it aside.
5. Using a thin blunt instrument, hook the release catch and lift
the clip.
6. With your finger, remove the old battery and set it aside.
7. Slide the new battery into the battery compartment with the +
side upwards.
8. Replace the battery clip.
9. Replace the back plate and screws.
9
SE212 English R7 OP_OK.p65
9
2006.1.6, 1:53 AM
To replace the chest belt battery:
1. Locate the battery compartment on the back of the chest belt.
2. Using a coin, as shown above, twist the compartment lid
counter-clockwise until it clicks out of place.
3. Set the battery compartment lid aside.
4. With your finger, remove the old battery and set it aside.
5. Insert the new battery with the + side upwards.
6. Replace the battery compartment lid by twisting it clockwise
until it is firmly in place.
IMPORTANT
•
Non-rechargeable and rechargeable batteries must be
disposed of properly. For this purpose, special containers are
provided for non-rechargeable and rechargeable battery
disposal at communal collection centres.
•
•
Batteries are extremely dangerous when swallowed!
Therefore, keep batteries and the article away from infants. If
a battery has been swallowed seek immediate medical advice.
The batteries supplied must not be recharged, reactivated by
any other means, dismantled, put into fire or short-circuited.
10
SE212 English R7 OP_OK.p65
10
2006.1.6, 1:53 AM
WEARING THE CHEST BELT AND WATCH
CHEST BELT
The heart rate chest belt is used to count your heartbeat and
transmit the data to the watch. To wear the chest belt:
1. Wet the conductive pads on the underside of the chest belt
with a few drops of water or a conductive gel to ensure solid
contact.
2. Strap the heart rate chest belt across your chest. To ensure
an accurate heart rate signal, adjust the strap until the belt
sits snugly below your pectoral muscles.
TIPS
•
The position of the chest belt affects its performance. Move
the chest belt along the strap so that it falls above your heart.
•
•
Avoid areas with dense chest hair.
In dry, cold climates, it may take several minutes for the chest
belt to function steadily. This is normal and should improve
with several minutes of exercise.
NOTE If the watch is kept idle without receiving a heart rate signal
for 5 minutes, the Heart Rate Mode will quit and return to Clock Mode.
WATCH
You can wear the receiver watch on your wrist or strap it to a bike
or exercise machine, as shown below.
11
SE212 English R7 OP_OK.p65
11
2006.1.6, 1:53 AM
TRANSMISSION SIGNAL
The heart rate chest belt and watch have a maximum transmission
range of about 62.5 centimetres (25 inches). They are equipped
with the latest digital coding system to reduce signal interference
from the environment, as well as analog technology. For more
accurate readings use the digital transmission signal. You should
only switch to the analog transmission signal if the situation in point
2 occurs (see below). Your watch will advise you which system it is
using and the signal status by displaying the following icons:
NOTE Whenever the watch is searching for the chest belt signal
(manual or automatic search), make sure that the chest belt is no
further than 10 cm (4 inches) from the watch.
ICON
DESCRIPTION
Outside heart is flashing Searching for a signal
Inside heart is flashing
Heart is flashing
A signal has been found and
the digital system is being
used
A signal has been found and
the analog system is being
used
No signal has been found
No signal has been found
To switch from digital to analog or analog to digital system,
NOTE
press the chest belt button for more than 4 seconds and then
force a signal search.
IMPORTANT
If the heart icon does not appear on the display or
is not flashing because no signal has been found, force a signal
search. See "Signal Search" section for how to do this.
In the event that you experience a weak signal or your signal is
disrupted by interference in the environment, follow the instructions
below to identify and resolve the situation.
1. The signal is weak - the watch heart rate monitor will only show "0":
•
•
•
•
Shorten the distance between the heart rate chest belt and watch.
Re-adjust the position of the heart rate chest belt.
Checktheconductivepadsaremoistenoughtoensuresolidcontact.
Check the batteries. If they are low or exhausted, the range
may be less.
•
Force a signal search (see "Signal Search" section).
12
SE212 English R7 OP_OK.p65
12
2006.1.6, 1:53 AM
2. The gym equipment does not seem to work with your chest
belt and the digital icon is displayed:
•
Most gym equipment is compatible with the analog system
. Press and hold the chest belt button for more than 4
seconds to change from digital to analog. Then force a signal
search (see “Signal Search” section)
3. Interference from another person's heart rate monitor - their
heart rate readings appear on your watch, or the heart rate
monitor shows "0":
•
Press the chest belt button to get the watch to receive your
chest belt signal. Do not press and hold the chest belt button,
as it will change the transmission signal from digital to
analog.
•
Take the chest belt off for 12 seconds to automatically
change your User ID. (The watch has 4 User ID's. When
the watch receives the chest belt signal it will tell you which
User ID it has selected. Only products with a digital coding
system have User ID capability.)
4. The signal is jammed - the heart rate reading on your watch is
flashing:
•
There is too much interference in the environment for your
heart rate monitor to function. Move to an area where the
heart rate reading stops flashing.
WARNING Signal interference in the environment can be due to
electromagnetic disturbances. These may occur near high voltage
power lines, traffic lights, overhead lines of electric railways, electric
bus lines or trams, televisions, car motors, bike computers, some
motor driven exercise equipment, cellular phones or when you
walk through electric security gates. Under interference, the heart
rate reading may become unstable and inaccurate.
13
SE212 English R7 OP_OK.p65
13
2006.1.6, 1:53 AM
SIGNAL SEARCH
To force a signal search:
1. Press MODE to navigate to the SMART TRAINING PROGRAM
or Stopwatch Mode.
2. Press and hold MODE for 2 seconds. The signal-searching
icon with the outside flashing will appear to confirm a signal
search is taking place. Whenever the watch is searching for
the chest belt signal make sure that the chest belt is no further
than 10 cm (4 inches) from the watch.
The signal search will take approximately 10 seconds. If after
10 seconds the heart icon is not flashing, then your signal search
has been unsuccessful and you need to force another signal search.
See the table in the "Transmission Signal" section for more signal
status information.
SETTING THE KEYPAD TONE / LIGHT MODE
You can set the watch to have the:
•
Keypad "Beep" tone ON or OFF.
•
Light Mode ON or OFF - see "Activating the Backlight" section.
To set these features:
1. Press MODE to navigate to the Real-Time Clock Mode.
14
SE212 English R7 OP_OK.p65
14
2006.1.6, 1:53 AM
2. Press SET until you reach the feature you wish to change.
3. Press ST / SP / + or MEM / - to change the setting.
4. Press SET to confirm the setting and move on to the next one.
ACTIVATING THE BACKLIGHT
When the Light Mode is set to OFF:
•
Press
to turn on the backlight for 3 seconds. Press any
other key whilst the light is on and it will extend the light time
by another 3 seconds.
When the Light Mode is set to ON:
•
Press any key to turn ON or extend the backlight for
3 seconds.
To help conserve power the Light Mode ON setting will
automatically switch to OFF after 2 hours.
The backlight does not work when the low battery icon is
NOTE
shown and will return to normal once the batteries are replaced.
ACTIVATING THE KEYPAD LOCK
To turn the keypad lock ON or OFF:
•
Press and hold for 2 seconds.
display when the keypad lock is on.
will appear on the
SWITCHING BETWEEN OPERATION MODES
Press MODE to switch between the 5 operation modes:
•
•
•
•
•
Real-Time Clock
Alarm Clock
User Profile / Exercise Profile
Timer - SMART TRAINING PROGRAM
Stopwatch
The modes are described in the sections that follow.
You can run the SMARTTRAINING PROGRAM or stopwatch
NOTE
in the background as you access other modes. The icon for the mode
that is running will flash until you switch back to that mode.
15
SE212 English R7 OP_OK.p65
15
2006.1.6, 1:53 AM
USING THE CLOCK
The real-time clock is the default display for the VIBRA Trainer Elite /
VIBRA Trainer Elite Pro watch.
To set the real-time clock:
1. Press MODE to switch to Real-Time Clock Mode.
2. Press and hold SET until the first setting flashes.
3. Press ST / SP / + or MEM / - to change the setting. Hold to
speed through the options. Press SET to confirm the setting
and move on to the next one.
4. Repeat step 3 to change other settings for this mode.
The order of the real-time clock settings is:
•
•
•
•
•
•
•
12 / 24 hour clock format
Hour
Minute
Year
DD:MM or MM:DD date format
Month
Day
The clock is programmed with a 50-year auto-calendar,
NOTE
which means you do not need to reset the days of the week and
dates each month.
16
SE212 English R7 OP_OK.p65
16
2006.1.6, 1:53 AM
USING THE ALARM(S)
SETTING THE ALARM(S)
Your watch has 2 alarms that can be set to activate daily
(Mon-Sun), on a weekday (Mon-Fri), or on a weekend (Sat / Sun).
To set alarm 1 or alarm 2:
1. Press MODE to navigate to Alarm Clock Mode.
2. Press SET to move the cursor to select alarm 1 or alarm 2
and ST / SP / + to activate or deactivate the alarm.
3. Press and hold SET to enter the setting mode for the chosen
alarm.
4. Press ST / SP / + or MEM / - to change the setting. Hold to
speed through the options. Press SET to confirm the setting
and move on to the next one.
5. Repeat step 4 to change other settings for this mode.
6. The alarm will automatically be activated once you have
finished setting the alarm time.
The order of the alarm clock settings is:
•
•
•
Select daily, weekday or weekend alarm
Hour
Minute
TURNING THE ALARM SOUND OFF
Press any key to turn the alarm sound off. The alarm will
automatically reset itself unless you deactivate it.
17
SE212 English R7 OP_OK.p65
17
2006.1.6, 1:53 AM
ACTIVATING / DEACTIVATING THE ALARM
1. Press MODE to navigate to Alarm Clock Mode.
2. Press SET to move to the cursor to select alarm 1 or 2.
3. Press ST / SP / + or MEM / - to activate
or deactivate
the alarm.
EXERCISE PROFILE
To calculate your minimum and maximum heart rate you need to
set the exercise profile.
The VIBRATrainer Elite watch supports 1 exercise profile, whereas
the VIBRA Trainer Elite Pro watch supports 3 different exercise
profiles.
Different activities exercise the body in different ways and help
you to achieve a variety of fitness goals. To accommodate this the
exercise profile can be set to suit different exercise activities. For
example, if you are running, your exercise profile settings are likely
to differ from those you would use when undertaking a weight
training activity.
Also, the time you require to warm-up and complete an exercise
will vary. That is why you can change the warm-up and exercise
countdown time to suit you.
To set the exercise profile:
1. Press MODE to navigate to Exercise Profile Mode.
2. If this screen appears, press SET to navigate to the Exercise
Profile Mode.
18
SE212 English R7 OP_OK.p65
18
2006.1.6, 1:53 AM
3. VIBRA Trainer Elite Pro only - press SET to navigate to 1 of
the 3 exercise profiles.
4. Press and hold SET until the first setting flashes.
5. Press ST / SP / + or MEM / - to change the setting. Hold to
speed through the options. Press SET to confirm the setting
and move on to the next one.
6. Repeat step 5 to change other settings for this mode.
The order of the user profile settings is:
•
•
•
•
Target activity - 0 to 2
Lower limit heart rate
Upper limit heart rate
Resume vibration mode (only appears when the battery is low,
this warning enables you to resume vibration mode or turn it
OFF to save power)
•
•
•
•
Heart rate alert
Exercise timer - hour
Exercise timer - minute
Warm-up timer - set to 5, 10, 15 to activate or 0 mins to
deactivate timer
•
Rest timer - ON / OFF (VIBRA Trainer Elite Pro only)
Once you have set your exercise profile your lower and
NOTE
upper heart rate limit will be set automatically. However, you can
manually change your upper and lower heart rate limit if the
automatic setting does not suit you. If you change the target activity
level, your upper / lower and maximum heart rate will automatically
be updated.
19
SE212 English R7 OP_OK.p65
19
2006.1.6, 1:53 AM
TARGET ACTIVITY
There are 3 target activity levels:
MHR% DESCRIPTION
TARGET ACTIVITY
0
1
Health
Maintenance
65-78% This is the lowest training
intensity level. It is good for
beginners and those who
want to strengthen their
cardiovascular systems.
Aerobic Exercise
65-85% Increases strength and
endurance. It works
within the body's oxygen
intake capability, burns
more calories, and can
be maintained for a long
period of time.
2
Anaerobic
Exercise
78-90% Generates speed and
power. It works at or above
the body's oxygen intake
capability, builds muscle,
and cannot be maintained
for a long period of time.
MAXIMUM / LOWER / UPPER HEART RATE LIMIT
Before you begin any exercise program and to achieve maximum
health benefits from your workout, it is important to know your:
•
•
•
Maximum heart rate (MHR)
Lower heart rate limit
Upper heart rate limit
To manually calculate your own heart rate limits, follow the
instructions below:
MHR
LOWER LIMIT
UPPER LIMIT
MHR =
220 - age
MHR x lower target
activity %.
MHR x upper target
activity %.
E.g. Target activity is 0
Lower Limit =
MHR x 65%
E.g. Target activity is 0
Upper Limit =
MHR x 78%
20
SE212 English R7 OP_OK.p65
20
2006.1.6, 1:53 AM
HEART RATE ALERT
You can set the heart rate alert in the exercise profile to the
following settings:
ICON
DESCRIPTION
Heart rate sound and vibration alert are OFF
Heart rate sound alert is ON
•
1 beep means you have gone below
your lower zone limit
•
2 beeps means you have gone above
your upper zone limit
Heart rate vibration alert is ON
Heart rate sound and vibration alert are ON
When the heart rate alert is activated, a flashing down or up arrow will
appearonthedisplaytoshowwhichheartratelimityouhavesurpassed.
NOTE Using the vibration feature consumes battery life at a faster
rate than the sound alarm.
NOTE If the watch is kept idle without receiving a heart rate signal
for 5 minutes, the Heart Rate Mode will quit and return to Clock Mode.
USER PROFILE
To access the full benefits of the VIBRA Trainer Elite / VIBRA
Trainer Elite Pro watch, set up your user profile before you exercise.
This will automatically generate a fitness index and body mass
index (BMI - VIBRA Trainer Elite Pro only). These calculations
along with the calorie and fat % burned will help you track your
progress over time.
To set the user profile:
1. Press MODE to navigate to User Profile Mode.
21
SE212 English R7 OP_OK.p65
21
2006.1.6, 1:53 AM
2. If this screen appears, press SET to navigate to the User Profile
Mode.
3. Press and hold SET until the first setting flashes.
4. Press ST / SP / + or MEM / - to change the setting. Hold to
speed through the options. Press SET to confirm the setting
and move on to the next one.
5. Repeat step 4 to change other settings for this mode.
The order of the user profile settings is:
•
•
•
•
•
•
•
•
•
Sex
Year of birth
Month of birth
Day of birth
Weight unit - lbs or kg
Weight
Height unit - feet or metres
Height
Activity level - 0-2
Once you complete your user profile, a fitness index and body
mass index is automatically calculated and displayed for you. Refer
to the "About the Fitness / Body Mass Index" section for further
information.
NOTE You can display and adjust your user profile at any time.
NOTE
and fat burn features.
You must set up your user profile to use the calorie count
22
SE212 English R7 OP_OK.p65
22
2006.1.6, 1:53 AM
ACTIVITY LEVEL
The activity level is based on your own self-assessment of the
amount of exercise you regularly perform.
ACTIVITY
LEVEL
DESCRIPTION
Low - You do not usually participate in
programmed recreation sports or exercise.
0
Medium-Youareengagedinmodestphysicalactivity
(such as golfing, horseback riding, table tennis,
callisthenics, bowling, weight lifting or gymnastics)
2-3 times a week, totalling 1 hour per week.
1
High - You actively and regularly participate in
heavy physical exercise (such as running,
jogging, swimming, cycling, or skipping rope)
or engage in vigorous aerobic exercise (such
as tennis, basketball or handball).
2
ABOUT THE FITNESS / BODY MASS INDEX
FITNESS INDEX
Your VIBRA Trainer Elite and VIBRA Trainer Elite Pro watch will
generate a fitness index based on your aerobic fitness. This index
is dependent and limited by the body's ability to deliver oxygen to
the working muscles in training. It is often measured by maximum
oxygen uptake (VO2 Max), which is defined as the highest amount
of oxygen that can be utilized when exercising at an increasingly
demanding level. The lungs, heart, blood, circulatory system, and
working muscles are all factors in determined VO2 Max. The unit
of VO2 Max is ml/kg min.
The higher the index, the fitter you are. See the tables below for a
rough guide to what your fitness index means:
FITNESS INDEX FOR MAN
Fitness index
23
SE212 English R7 OP_OK.p65
23
2006.1.6, 1:53 AM
FITNESS INDEX FOR WOMAN
Fitness index
BODY MASS INDEX (VIBRA TRAINER ELITE PRO ONLY)
Your body mass index is a measurement of the relative
percentages of fat and muscle mass in the human body.
HEALTH
INDICATION
BMI RANGE
DESCRIPTION
Your body weight is currently
lower than average. Work
toward healthy, regular food
intake and exercise routine
to build up your health to
recommended levels.
Less than 20.0
Underweight
Your health is at the
recommended level.
Maintain a balanced diet
and exercise to keep your
current level of health.
Recommended
20.0 to 25.0
25.1 to 29.9
Overweight
Your body weight may be
above normal. Increase
your exercise and work out
a diet plan to lower your
risk for serious illness.
At this level, you may be at
risk for heart disease, high
blood pressure, and other
illnesses. Consult with your
doctor to develop a proper
health and fitness plan.
Obese
30.0 or greater
24
SE212 English R7 OP_OK.p65
24
2006.1.6, 1:53 AM
NOTE
the following groups:
BMI should not be used as a guideline for health risks for
GROUP
REASON
Children and teenagers
BMI ranges are only based
on adult heights.
Athletes and body builders BMI does not differentiate
between fat and muscle, thus
making it inaccurate for persons
with high muscle volumes.
Pregnant or nursing women This group generates
naturally high fat reserves
as part of the pregnancy.
People over the age of 65 Fat reserves naturally tend to
be higher with older persons.
NOTE The above BMI information is based on an average
Caucasian physique.
VIEW FITNESS / BODY MASS INDEX
Press MODE to navigate to the User Profile Mode. Then, press
MEM / - to display your fitness and body mass index.
If you have not completed your user profile, these will not
NOTE
display and "- -" will show on the display. Only VIBRATrainer Elite
Pro users will be given a BMI reading.
ABOUT THE SMART TRAINING PROGRAM
The SMART TRAINING PROGRAM enables you to complete
exercise cycles effectively. It will guide you through from a 5-minute
warm up (default setting), to the end of your exercise program. In
addition to monitoring your heart rate and alerting you whenever
you fall out of the range for the selected training zone, the Program
allows you to check the calories consumed and the percentage of
fat burned.
25
SE212 English R7 OP_OK.p65
25
2006.1.6, 1:53 AM
USING THE SMART TRAINING PROGRAM
The SMART TRAINING PROGRAM monitors your exercise
performance once you have entered your user profile and
exercise profile.
NOTE You cannot use the SMART TRAINING PROGRAM if you
are running the stopwatch.
To enter the SMART TRAINING PROGRAM:
1. Press MODE to navigate to Timer Mode.
2. VIBRA Trainer Elite Pro only - press and hold SET. Press
ST / SP / + or MEM / - to select 1 of the 3 exercise profiles.
Press SET to confirm and enter the SMART TRAINING
PROGRAM.
3. To start or stop the warm-up, exercise or recovery countdown
timer, press ST / SP / +. Once you stop any countdown timer
you cannot resume the timer unless you press and hold
ST / SP / +. (Please see point 4 below). At the end of each
countdown period you will hear a beep.
•
•
•
3 beeps = warm-up time completed.
1 long beep = exercise time completed.
3 beeps in 2 cycles = rest time completed (VIBRA Trainer Elite
Pro only).
4. To bypass a timer setting and move onto the next one, press
and hold ST / SP / +.
5. To reset the timer, press and hold SET.
WATCH
INSTRUCTION
VIBRA Trainer Elite
Press and hold ST / SP / + when
the exercise timer has stopped.
VIBRA Trainer Elite Pro;
rest timer not activated
26
SE212 English R7 OP_OK.p65
26
2006.1.6, 1:53 AM
WATCH
INSTRUCTION
VIBRA Trainer Elite Pro;
rest timer activated
Press and hold ST / SP / + when
the rest timer has stopped.
The order of the Timer Mode setting is:
•
Warm-up time
-
The warm-up will not display if it has been set to "0", in
the exercise profile.
•
•
Exercise time
The exercise time is set in the exercise profile.
Rest time
VIBRA Trainer Elite Pro only - The rest time is automatically
-
-
set to 3 mins and cannot be changed. When the timer
reaches "0", the recovery heart rate will appear.
VIEW DATA WHILE SMART TRAINING PROGRAM IS RUNNING
During warm-up, exercise or rest time countdown, press SET to
view and toggle between the following screen displays:
•
Remaining warm-up / exercise / rest time with current heart rate
27
SE212 English R7 OP_OK.p65
27
2006.1.6, 1:53 AM
•
Current calorie and fat burn level
•
Clock with current heart rate
VIEW SMART TRAINING PROGRAM MEMORY RECORDS
When the SMART TRAINING PROGRAM has been completed,
press MEM / - to view the following records:
•
Total time / maximum heart rate (max. heart rate shows only
on VIBRA Trainer Elite Pro)
•
•
•
Recovery heart rate / average heart rate
Total calorie and fat burn level
In zone time: Time spent without exceeding your upper or
lower heart rate limit
•
•
Above zone time: Time spent exceeding your upper heart
rate limit
Below zone time: Time spent exceeding your lower heart
rate limit
NOTE
SMART TRAINING PROGRAM.
You cannot use the stopwatch if you are running the
RECOVERY HEART RATE (VIBRA TRAINER ELITE PRO ONLY)
Your recovery heart is a good indication of cardiovascular fitness.
The faster your heart rate recovers after exercise, the better shape
you are in. The watch uses a time-based recovery method, which
checks your recovery heart rate 3 minutes after exercise.
Compare your recovery heart rate between exercise sessions to
track the effect your exercise is having.
28
SE212 English R7 OP_OK.p65
28
2006.1.6, 1:53 AM
STOPWATCH
The stopwatch watch function is particularly beneficial to use when
you are unsure how long your activity will take, or when you want
to measure the time it takes to complete a task and your
performance over that time. VIBRA Trainer Elite Pro users can
also take lap and split time readings when using the stopwatch
function.
To get the most out of your stopwatch function complete your
user and exercise profile. If you have not completed the user profile
you will be unable to use the calorie and fat burn function.
Press MODE to navigate to Stopwatch Mode. You can now perform
the following functions:
TASK
INSTRUCTION
Start stopwatch
Press ST / SP / +
Pause / resume stopwatch Press ST / SP / +
Reset
Press and hold SET
Save lap (VIBRA Trainer
Elite Pro only)
Press L / MEM / - while the
stopwatch is running
NOTE Up to 99 laps / 99 hrs,
59 mins total can be stored in
the memory
Select exercise profile for
stopwatch (VIBRATrainer
Elite Pro only)
Reset the stopwatch. Press
and hold SET
NOTE The stopwatch begins measurement in min:sec:1/100 sec.
After 59 minutes pass, the display will change to hrs:min:sec.
VIEW DATA WHILE STOPWATCH / LAP IS RUNNING
While the stopwatch or lap functions are being used, press SET
to view and toggle between the following screen displays:
•
•
•
•
Total time / split time and current heart rate
Lap time and current heart rate (if enabled)
Current calorie and fat burn level
Clock with current heart rate
Split time and lap time readings only appear on VIBRA
NOTE
Trainer Elite Pro watches.
29
SE212 English R7 OP_OK.p65
29
2006.1.6, 1:54 AM
If the battery is low when taking a lap, this screen will appear and
no more laps will be saved.
VIEW STOPWATCH OR LAP MEMORY RECORDS
To view stopwatch records:
1. The stopwatch must be stopped (press ST / SP / +).
2. Press MEM / - to view memory records.
3. Press SET to view each record.
The stopwatch records will appear in the following order:
•
Total time / maximum heart rate (max. heart rate shows only
on VIBRA Trainer Elite Pro)
•
•
•
Total time / average heart rate
Calories / fat burn total
In zone time: Time spent without exceeding your upper or
lower heart rate limit
•
•
Above zone time: Time spent exceeding your upper heart
rate limit
Below zone time: Time spent exceeding your lower heart
rate limit
To view lap records (VIBRA Trainer Elite Pro only):
1. The stopwatch must be stopped (press ST / SP / +).
2. Press L / MEM / - to view memory records.
30
SE212 English R7 OP_OK.p65
30
2006.1.6, 1:54 AM
3. Press + or - to select lap.
4. Press SET to view each lap record.
The lap records will appear in the following order:
•
•
•
•
•
Lap time / lap number
Lap time / maximum heart rate
Split time / average heart rate
Calorie and fat burn total - per lap
In zone time - per lap: Time spent without exceeding your
upper or lower heart rate limit
•
•
Above zone time - per lap: Time spent exceeding your upper
heart rate limit
Below zone time - per lap: Time spent exceeding your lower
heart rate limit
TRAINING INFORMATION
HOW THE HEART RATE MONITOR HELPS YOU
A heart rate monitor is the most important tool in cardiovascular
health and an ideal training partner. It enables you to see and
monitor results. This helps you assess your past performance,
maximise your work out and adapt your future exercise program
to achieve your desired goals in a safer and more effective way.
When you exercise, the chest belt picks up your heartbeat and
sends it to the watch. Now you can view your heart rate and start
monitoring your performance based on your heart rate readings.
As you get fitter, your heart will need to do less work and the
speed of your heart rate will decrease. The reason for this is as
follows:
•
Your heart pumps blood to your lungs to obtain oxygen.
Then, the oxygen rich blood will travel to your muscles.
The oxygen is used as fuel and the blood leaves the muscles
and returns to the lungs to begin the process again. As you
get fit, your heart is able to pump more blood with every
beat. As a result, your heart doesn't have to beat as often
to get the necessary oxygen to your muscles.
31
SE212 English R7 OP_OK.p65
31
2006.1.6, 1:54 AM
TRAINING TIPS
To gain the maximum benefit from your training program, and to
ensure that you exercise safely, please observe the following
guidelines:
•
•
•
Start with a well-defined training goal, such as to lose weight,
keep fit, improve health or compete in a sporting event.
Select a training activity you enjoy, and vary your training
activities to exercise different muscle groups.
Start slowly, and then gradually step up your work out as
you become fitter. Exercise regularly. To maintain a healthy
cardio-vascular system, 20-30 minutes three times a week
is recommended.
•
•
Always allow at least five minutes before and after exercising
for warm-up and cool-down.
Measure your pulse after training. Then repeat the
procedure again after three minutes. If it does not return to
its normal resting rate, you may have trained too hard.
•
Always check with your doctor before starting a vigorous
training program.
CARE INSTRUCTIONS
To ensure you receive the maximum benefit from using this
product, please observe the following guidelines:
•
•
•
Clean the watch and chest belt thoroughly after each training
session. Never store the products when wet.
Use a soft, slightly moistened cloth. Do not use abrasive or
corrosive cleaning agents, as these may cause damage.
Avoid pressing the keys with wet fingers, under water, or in
heavy rain, as this may allow water to gain entry into the
electrical circuitry.
•
•
Do not bend or stretch the transmitter part of the chest belt.
Do not subject the product to excessive force, shock, dust,
temperature changes, or humidity. Never expose the
product to direct sunlight for extended periods. Such
treatment may result in malfunction.
•
•
Do not tamper with the internal components. Doing so will
terminate the product warranty and may cause damage.
The main unit contains no user-serviceable parts.
Do not scratch hard objects against the LCD display as this
may cause damage.
32
SE212 English R7 OP_OK.p65
32
2006.1.6, 1:54 AM
•
•
Remove the batteries whenever you are planning to store
the product for a long period of time.
When replacing batteries, use new batteries as specified in
this user manual.
AQUATIC AND OUTDOOR ACTIVITIES
The watch is water-resistant up to 50 metres. The chest belt is
water-resistant up to 10 metres, but should not be worn for
underwater activities, as the heart rate transmission cannot occur
under water. Refer to the table for proper use guidelines.
RAIN
SPLASHES, (WARM /
SHOWERING LIGHT
SHALLOW SNORKELING
SWIMMING DIVING /
/ SHALLOW SURFING / WATER
WATER
/ DEEP
ETC
COOL
WATER
ONLY)
WATER
SPORTS
DIVING
NO
50m / 165ft
OK
OK
OK
NO
When using the watch for aquatic or outdoor sports activities,
observe the following guidelines:
•
•
•
Do not press the keys under water or with wet fingers.
Rinse with water and mild soap after use.
Do not use in hot water.
TIPS FOR KEEPING YOUR WATCH FIT
Keep your watch water resistant! Avoid chemicals (gasoline,
chlorine, perfumes, alcohol, hair sprays, etc.). Rinse after use.
Reduce exposure to heat. Have your watch serviced by an
approved service centre annually.
SPECIFICATIONS
TYPE
DESCRIPTION
CLOCK
Time format
Date format
Year format
Alarms
12 hr / 24 hr
DD / MM or MM / DD
2001-2050 (auto-calendar)
Alarms 1 and 2 with daily,
weekday or weekend settings
33
SE212 English R7 OP_OK.p65
33
2006.1.6, 1:54 AM
TYPE
DESCRIPTION
STOPWATCH
Stopwatch
99:59:59 (HH:MM:SS)
1/100sec
Resolution
Lap counter
99 laps share 99:59:59
(HH:MM:SS) (VIBRA Trainer
Elite Pro only)
SMART TRAINING PROGRAM
Warm-up timer
Exercise timer
Rest timer
Set to 5, 10, 15, or 0 mins
99:59:00 (HH:MM:SS)
3 mins fixed time (VIBRA
Trainer Elite Pro only)
PERFORMANCE TRACKING
Heart rate (HR) alarm
Vibrate / sound / visual
HR measuring range
30-240 bpm (beats per minute)
30-220 bpm (beats per minute)
Lower HR settable range
Upper HR settable range
Calories calculation
80-240 bpm (beats per minute)
0-9,999 kcal
% fat burning calculation
0-99%
TRANSMISSION
Range
62.5 cm (25 inches) - may
decrease with low battery
WATER RESISTANT
Watch
50 metres (not actuating keys)
Splash proof
Chest belt
POWER
Watch
1 x CR2032 3V lithium battery
1 x CR2032 3V lithium battery
Chest belt
OPERATING ENVIRONMENT
Operation temperature
Storage temperature
5°C-40°C (41°F-104°F)
-20°C-70°C (-4°F-158°F)
34
SE212 English R7 OP_OK.p65
34
2006.1.6, 1:54 AM
WARNINGS
To ensure you use your product correctly and safely, read these
warnings and the entire user manual before using the product.
The warnings given here provide important safety information and
should be observed at all times.
•
The product is a precision instrument. Never attempt to take
this device apart. Contact the retailer or our customer service
department if the product requires servicing.
•
Do not touch the exposed electronic circuitry, as there is a
danger of electric shock.
•
•
Take precautions when handling all battery types.
Remove the batteries before storing the product for a long
period of time.
•
Do not use the chest belt in aircrafts or hospitals. The use
of radio frequency products can cause malfunctions in the
control devices of other equipment.
•
•
Do not subject the product to impact or shock.
Check all major functions if the device has not been used
for a long time. Maintain regular internal testing and cleaning
of your device.
•
When disposing of this product, do so in accordance with
your local waste disposal regulations.
ABOUT OREGON SCIENTIFIC
Oregon Scientific products such as digital cameras; MP3 players;
children's electronic learning products and games; projection
clocks; health and fitness gear; weather stations; and digital and
conference phones. The website also includes contact information
for our customer care department in case you need to reach us,
as well as frequently asked questions and customer downloads.
We hope you will find all the information you need on our website,
however if you’re in the US and would like to contact the Oregon
Scientific Customer Care department directly, please visit:
www2.oregonscientific.com/service/default.asp
OR
Call 1-800-853-8883.
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp
35
SE212 English R7 OP_OK.p65
35
2006.1.6, 1:54 AM
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this VIBRATrainer Elite /
VIBRA Trainer Elite Pro model SE212 / SE233 is in compliance
with EMC directive 89/336/CE. A copy of the signed and dated
Declaration of Conformity is available on request via our Oregon
Scientific Customer Service.
36
SE212 English R9 OP_OK.p65
36
2006.1.11, 10:54 AM
|