NHT Speaker SW3S User Manual

SW3S Subwoofer  
Owner’s Manual  
Thank you for your purchase of the NHT Model SW3S Subwoofer. Please take a few minutes to read through this Owner’s  
Manual prior to installing your new subwoofer. The information provided can help you to obtain maximum performance  
from your audio system. If you have questions or need assistance at any time during the installation or operation of your  
new subwoofer, please call your NHT Dealer or our Toll-Free Customer Hotline at:  
1-800-NHT-9993  
Please retain the Model SW3S packaging to protect the subwoofer in the event that you move or transport it.  
Model SW3S Specifications  
System Type: Acoustic Suspension design  
Impedance: 6 ohms nominal, 4 ohms minimum  
Inputs: 1 pair of 5-way binding posts  
Driver Complement: 12” polypropylene woofer  
Weight: 72 lbs. each  
Response: 23Hz to 250Hz  
Dimensions: 19”H x 19”W x 19”D  
Sensitivity: 87dB (2.83V at 1M)  
Finish: High gloss black laminate  
Recommended Power: 50 watts min., 250 watts max.  
Specifications are subject to change without notice, in accordance with our policy of continuously upgrading the performance of our products.  
Design  
NHT speakers are designed to deliver refined, musical sound from attractive and affordable packages. Our efforts are guided by  
the study of human hearing and are optimized for real-world use. Every NHT loudspeaker undergoes rigorous testing and  
quality control at the factory to ensure you years of listening pleasure.  
The SW3S Subwoofer features a custom-designed 12” polypropylene woofer that is capable of accurate low frequency reproduc-  
tion to 23Hz, with high output and low distortion. The SW3S, when combined with the NHT SA-3 monaural subwoofer amplifier,  
comprises the NHT SW3P Powered Subwoofer System. For a flatter overall low frequency response and increased clarity, two  
SW3S subwoofers may be connected in parallel to the NHT SA-3 subwoofer amplifier, which is designed with enough high  
current capability to drive two subwoofers. Alternately, you can use an external crossover and a monaural amplifier of your choice  
to create your own powered subwoofer system.  
Placement  
Contrary to popular belief, subwoofers are sensitive to placement. Experimentation is the key to finding the best arrangement in  
your listening environment. Generally, a subwoofer should be located in the same horizontal plane and along the same wall as  
the main speakers. Low frequencies produce long wavelengths and thus interact with room boundaries significantly. Placing the  
subwoofer nearer to a room boundary (walls, corners) will tend to increase its bass output, but may result in “boomy” or “muddy”  
sound. Conversely, placing the subwoofer farther away from room boundaries will tend to decrease its bass output, but may result  
in improved articulation and clarity.  
Position the subwoofer so that it does not radiate sound directly into a wall or floor, and ensure that it faces into the room,  
unobstructed by large furnishings. If you are using two subwoofers, the greatest improvement in low frequency response is  
achieved by placing the second subwoofer on the opposite side of the room from the first. Avoid placing the two subwoofers  
symmetrically in the room (such as in two corners). As the SW3S is not magnetically shielded, do not place it in the immediate  
vicinity of a television, or picture discoloration may occur.  
Connections  
The SW3S Subwoofer is designed for use with an external crossover and a monaural amplifier. The SW3S does not have an inter-  
nal crossover, so it should not be connected to any other amplifier or integrated amplifier unless it has a low-pass filter. Using the  
SW3S without a low-pass filter will not damage it, however the resulting sound will be undesirable.  
Before connecting the SW3S to the SA-3 (or any amplifier), it is very important that you turn off the power to the amplifi-  
er. Proper wiring of the subwoofer is essential to good sound. NHT recommends a minimum of 14 AWG wire to connect the SW3S  
Subwoofer to the SA-3 Amplifier. If you choose to place the subwoofer at a distance greater than 15 feet away from the amplifi-  
 

Miele Cooktop KM5600 User Manual
Miele Ventilation Hood DA239 3 User Manual
Multiquip Biscuit Joiner MVC88VTH User Manual
NHT Home Theater System VS 12a User Manual
Nikon Scanner LS 2000 User Manual
Niles Audio Speaker CM61SI User Manual
Nissan Automobile Accessories 4073 User Manual
Optoma Technology Projector HD7300 User Manual
Panasonic Vacuum Cleaner MC GG773 User Manual
Parasound Stereo Amplifier 2250 V2 User Manual